F2-02DA-1L - PLC DIRECT F2-02DA-1L OUTPUT MODULE ANALOG 2 POINT 4-20MA 12 BIT

F2-02DA-1L - PLC DIRECT F2-02DA-1L OUTPUT MODULE ANALOG 2 POINT 4-20MA 12...

PLC DIRECT F2-02DA-1L OUTPUT MODULE ANALOG 2 POINT 4-20MA 12 BIT Simple Type: TBD

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Analog outputs are optically isolated from the PLC logic.
Low-power CMOS design requires less than 60mA from an external 18--30 VDC power supply.
The module has a removable terminal block so the module can be easily removed or changed
With a DL240, DL250--1 or DL260 CPU, you can update both channels in one scan.
without disconnecting the wiring.

General

Conversion Settling time: 100µsmaximum(full scale change) Conversion Settling time 100µsmaximum(full scale change)
Environmental air: No corrosive gases permitted
Linearity Error(end to end): ?1count(?0025%of full scale)maximum Linearity Error(end to end) ?1count(?0.025%of full scale)maximum
Load Impedance: 0Ominimum
Maximum Load/Power Supply: 620O/18V910O/24V1200O/30V Maximum Load/Power Supply 620O/18V,910O/24V,1200O/30V
Maximum Loop Supply: 30VDC
Noise Immunity: NEMA ICS3--304
Number of Channels: 2
Operating Temperature: 0to60_C(32to140?F) OperatingTemperature 0to60_C(32to140?F)
Output Ranges: 4to20mA
Output Type: Single ended, 1 common
Peak Output Voltage: 40VDC(clamped by transient voltage suppressor)
Relative Humidity: 5 to 95% (non-condensing)
Resolution: 12 bit (1 in 4096)
Shock: MIL STD 810C 516.2
Storage Temperature: --20 to 70_C(--4to158?F)
Vibration: MIL STD 810C 514.2